In-Lite cables
CABLE CAP MEDIUM
Caps to close off the ends of the 14/2 cable.
CABLE CAP STANDARD
Caps to close off the ends of the 14/2 cable.
CBL-120 10/2
System cable - 120m
Low-voltage 10/2; 2-conductor cable.
CBL-160 10/2
System cable - 160m/525ft
Low-voltage 10/2; 2-conductor cable.
CBL-160 12/2
System cable - 160m/525ft
Low-voltage 12/2; 2-conductor cable. 525 ft
CBL-200 14/2
System cable - 200m/656ft
Low voltage cable type 14/2 12-volt 2-wire.
CBL-25 14/2
System cable - 25m/82ft
Low voltage cable type 14/2 12-volt 2-wire.
CBL-40 10/2
System cable - 40m
Low-voltage 10/2; 2-conductor cable.
CBL-40 14/2
System cable - 40m/131ft
Low voltage cable type 14/2 12-volt 2-wire.
CBL-80 12-2
System cable - 80m/262.5ft
Low-voltage 12/2; 2-conductor cable.
CBL-EXT CORD 1 MTR
Extension cable type 20/2
Extension cable for increasing the distance from the luminaire to the low-voltage cable. Can also be used to extend the distance between light sensor and transformer.
CBL-EXT CORD 2 MTR
Extension cable type 20/2
Extension cable for increasing the distance from the luminaire to the low-voltage cable. Can also be used to extend the distance between light sensor and transformer.
CBL-EXT CORD 3 MTR
Extension cable type 20/2
Extension cable for increasing the distance from the luminaire to the low-voltage cable. Can also be used to extend the distance between light sensor and transformer.
CC-2
Cable connector to connect two 12 volt low-voltage cables in a split cable plan.
EASY-LOCK
The in-lite EASY-LOCK connector allows you to connect an in-lite fixture to the main cable at any location.
Note: The EASY-LOCK is supplied as standard with each luminaire.
EVO FLEX-EXT CORD 1
This cable is only needed if extra length is desired.
EVO FLEX EXT CORD 1 is an accessory that can be used to connect EVO FLEX (1, 2, 3) to EVO FLEX DRIVER 1 and the in-lite 12V system. With EVO FLEX EXT CORD 1, EVO FLEX DRIVER 1 can be connected further away from the luminaire.
SMART-EXT CORD TONE 1
This cable is only needed if extra length is desired.
SMART EXT CORD TONE 1 is an accessory that can be used to connect SMART EVO FLEX TONE (1, 2 and 5) to SMART DRIVER TONE 1 and the in-lite 12V system. SMART EXT CORD TONE 1 allows SMART DRIVER TONE 1 to be connected further away from the fixture.
MOVE-EXT CORD 5 MTR
Extension cable for MOVE motion detector. Maximum extension to 20 meters (65,62 ft).
LIGHT SENSOR HUB
Light sensor for HUB