MOVE

The MOVE detects motion up to 12 metres at an angle of 40 degrees vertically and 105 degrees horizontally. Easy to connect to the transformer using the tulip connector.

You set the functions of the motion detector on the transformer itself. The direction of the motion detector can still be adjusted downwards after mounting.

Equipped with a two-meter cable that can be extended to 20 meters using the MOVE EXT-CORD 5MTR (sold seperately)

• Wired motion detector for HUB-50 and HUB-100
• Detects up to 12 meters
• Adjustable for 1, 3 or 9 minutes

Installation Instructions:

Move Installation Manual

Place the MOVE flat against a hard surface at a height of 1.8 to 2 meters. Install vertically using the screws provided. The various functions of the motion detector are set on the transformer itself. You can also adjust the direction of the motion detector downwards following installation.